Ali-S Posted July 31, 2018 Share Posted July 31, 2018 Hi, i am new here and it's first time to use corsair products, i bought H60 2017 edition. and when i opened it, i saw very small drop on one of screws on pump i got so worried so i cleaned it and tie the screw very well. and i tested it without installing for like 2 mins with moving the pump and tubes in various ways but didn't saw any drops. so my question here: should i use it after this? Link to comment Share on other sites More sharing options...
MikeyR Posted July 31, 2018 Share Posted July 31, 2018 I would still use it, but with close observation. Get som paper towels and put it around the pump and radiator. It is really easy to see if paper towel have been wet before. Then turn on the system, listen for weird noises if the system is low on water it should be really audible. And then just check occasionally for drops on the paper towels. I will let the system run for at least 24 hours before I will say it is safe to use. (that's the thumb rule for custom water loops) Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Lettuce Posted July 31, 2018 Corsair Employees Share Posted July 31, 2018 Honestly, if you see/ feel any liquid or moisture I would get a new unit. Please create a support ticket, I'm sure the tech support team would like to get their hands on the cooler themselves. Link to comment Share on other sites More sharing options...
Ali-S Posted July 31, 2018 Author Share Posted July 31, 2018 I would still use it, but with close observation. Get som paper towels and put it around the pump and radiator. It is really easy to see if paper towel have been wet before. Then turn on the system, listen for weird noises if the system is low on water it should be really audible. And then just check occasionally for drops on the paper towels. I will let the system run for at least 24 hours before I will say it is safe to use. (that's the thumb rule for custom water loops) I'll do that, maybe it's from assembly in factory not sure, and when i tested the AIO it sound like normal no weird noises at all. Honestly, if you see/ feel any liquid or moisture I would get a new unit. Please create a support ticket, I'm sure the tech support team would like to get their hands on the cooler themselves. if something happened, i'll contact support because i ordered from Amazon and arrived at my country and i can't return it back because i use shipping company only with one way. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.