ettorelandolfi Posted July 25, 2018 Share Posted July 25, 2018 Hi everyone..i am a corsair psu user;i have an rm850i and now i have a rm1000. Assumed that the fan of the rm1000 cant be turned on by the c-link software,what is possible to do with the standard cable (without the converter analog to usb)?the cable have a three pin and a two pin connectors;can we connect a regulator to this connectors?if not,can i open the psu case(i lost the guarantee)and hack the fan and connect it to a 12v,so it spin forever? Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Mint Posted July 26, 2018 Corsair Employees Share Posted July 26, 2018 The RM1000 comes with Zero RPM fan mode, so fans won't spin up until heavy thermal load via sensors. You would need the converter cable to connect the PSU and have it controllable via Link. Link to comment Share on other sites More sharing options...
ettorelandolfi Posted July 29, 2018 Author Share Posted July 29, 2018 The RM1000 comes with Zero RPM fan mode, so fans won't spin up until heavy thermal load via sensors. You would need the converter cable to connect the PSU and have it controllable via Link. I have the cable,with the converter to usb,but I still have 0 rpm in the Corsair link interface,and no possibilities to turn on the fan or create a different ramp. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Mint Posted July 30, 2018 Corsair Employees Share Posted July 30, 2018 Sorry, ettorelandolfi, I misspoke, with the interface in Corsair Link, you'll be able to monitor fan speed and power delivery, but not control of the fan. Link to comment Share on other sites More sharing options...
ettorelandolfi Posted August 1, 2018 Author Share Posted August 1, 2018 It’s right,so do you think that I can connect the fan directly to a fan pin on the mboard? Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Mint Posted August 3, 2018 Corsair Employees Share Posted August 3, 2018 Unfortunately, that'd require taking apart the PSU and it's not something we can recommend or help with. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.