dragonhunter Posted February 17, 2005 Share Posted February 17, 2005 Hi The Ram Guy, I have a pair of twinx1024-3200c2pt (2x512) and have been running at stock setting and with SPD enable. I just found out that they have been running @ 2.5-3-3-8 timing :confused: . I try to set the ram @ 2-3-3-6 like Corsair advertised but they refused to boot ( the screen went black). :eek: :(: Things that I have tried: 1) Try the ram in Abit IC7 Max3 and Asus 800P4C-E Deluxe 2) Up the DDR voltage to 2.85V 3) Up the AGP voltage to 1.60V 4) Set all the Memory Performance Settings to "Auto" Thank you very much ;): Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 17, 2005 Corsair Employees Share Posted February 17, 2005 Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
dragonhunter Posted February 17, 2005 Author Share Posted February 17, 2005 Woww!! a Wooping 1 minute. Thanks, you guy are Corsair extreme fast!!! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 17, 2005 Corsair Employees Share Posted February 17, 2005 LOL! What can I say? Please let me know when you get the new modules! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.