Jump to content
Corsair Community

ASUS A8V & Corsair Twinx1024RE-3200LLPT Issues running dual mode


valleydesi

Recommended Posts

Problem: System will not post with 2 sticks in the proper slots

Tried Solutions:

I read thru a lot of posts on these forums and tried out the various settings suggested here. My current voltage and timings are

Dim Voltage to +2.7 Volts:

CAS Latency CL=2.0

Row Cycle Time tRC Bios Default

Row Refresh Cyc Time tRFC Bios Default

Ras# to CAS# delay tRCD 3

Row to Row delay Bios Default

Min Ras# Active Time tRAS 6

Row Precharge Time tRP 2

Write Recovery Time Bios Default

Write to Read delay Bios Default

Read to Write Delay Bios Default

Refresh Period tREF Bios Default

Enable 2T Timing Enabled

 

Ran Memtest86 v3.2 on both sticks individually. Niether have reported any issues. Interchanged both sticks in slot 3, the system boots and remains stable.

 

Looking for some ideas here as to why the system will not post. My other specs are

CPU: Athlon 3500+

Radeon 7200 (I know this is old but I am not in a mood to throw this one away yet and I am not much into gaming. Maybe at next upgrade)

WD 160Gb SATA

Quantum 60Gb IDE

 

Thanks in advance

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...