Miller1236 Posted February 15, 2005 Share Posted February 15, 2005 I am upgrading my Dimension L800R PC , I am looking to buy two sticks of 256Mb value Select ram.What value Select ram will work on my system ? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 15, 2005 Corsair Employees Share Posted February 15, 2005 This system will need to use VS256MB100 and please make sure there is no "A" in the part# as that would be a single sided 256 Meg module and this system will need to have double sided memory. Or have 16 IC's on the modules 8 on each side. Link to comment Share on other sites More sharing options...
Miller1236 Posted February 16, 2005 Author Share Posted February 16, 2005 Willl the VS256MB133 also work on this system, this is Dell specs Manufacturer Part# D48WJW Dell Part# 842447-1 Package Type: 168-pin DIMM Logical Type: 32Meg x 64 Speed: 133MHz Description: Non-Parity, Unbuffered Link to comment Share on other sites More sharing options...
Miller1236 Posted February 16, 2005 Author Share Posted February 16, 2005 This system will need to use VS256MB100 and please make sure there is no "A" in the part# as that would be a single sided 256 Meg module and this system will need to have double sided memory. Or have 16 IC's on the modules 8 on each side. Hi Ram Guy, Willl the VS256MB133 also work on this system, this is Dell specs Manufacturer Part# D48WJW Dell Part# 842447-1 Package Type: 168-pin DIMM Logical Type: 32Meg x 64 Speed: 133MHz Description: Non-Parity, Unbuffered Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 16, 2005 Corsair Employees Share Posted February 16, 2005 They might but you would need to replace the modules you have now. In other words I would not suggest mixing PC100 and PC133 memory. And the same is true, please make sure there is no "A" in the part#. Link to comment Share on other sites More sharing options...
Miller1236 Posted February 16, 2005 Author Share Posted February 16, 2005 They might but you would need to replace the modules you have now. In other words I would not suggest mixing PC100 and PC133 memory. And the sane is true, please make sure there is no "a" in the part#. Yes I plan on replacing both modules, the system has a 128MB and I plan on replacing the 128mb with two 256MB for 512mb that is the max the board will take. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 16, 2005 Corsair Employees Share Posted February 16, 2005 You should be fine. Please let me know if you have any questions. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.