Jump to content
Corsair Community

ICUE / HX1200i issue


f3bandit
 Share

Recommended Posts

no matter how I change the fans speeds and to what temp triggers

fan never comes on. I( can press the fan test button and it spins up.

so the fan is not broken. but i guess ICUE has an issue there.

it was working before with the old link software so I know that much

Link to comment
Share on other sites

I've not had any issue.

Did you apply the performance settings to the HX1200i fan? You have to create the performance setting, set it and then click on the fan to apply it to the fan.

 

Could you show the HX1200i Performance screen?

Link to comment
Share on other sites

So I managed to force the fan on by changing the settings under notifications,

And settings it to set the fan to 100% if the temp is above 21c. Unfortunately

this makes ICUE show a warning icon at the bottom of the window. Since I

obviously know its not a real emergency it's fine for now.

 

But wanted to make sure whoever is in charge of said issues is aware.

 

screen capture

 

ICUE Logs/Info

Link to comment
Share on other sites

So I managed to force the fan on by changing the settings under notifications,

And settings it to set the fan to 100% if the temp is above 21c. Unfortunately

this makes ICUE show a warning icon at the bottom of the window. Since I

obviously know its not a real emergency it's fine for now.

 

But wanted to make sure whoever is in charge of said issues is aware.

 

screen capture

 

ICUE Logs/Info

 

I'd wait for the next build and give that a shot. If not, we'll get into some more troubleshooting. Because it may already be fixed ...

Link to comment
Share on other sites

hmm thats weird. I have an AX1200i, but i can just set a manual profile for it, and the fans starts turning.

 

tIQfSbqh.png

 

Did tried also an custom curve, and set the sensor to your power supply, like me?

Edited by Oxize
Link to comment
Share on other sites

 Share

×
×
  • Create New...