Jump to content
Corsair Community

HD fans controller getting hot


Neiledwards27
 Share

Recommended Posts

I reecently bought a set of hd120 fans and the controller to switch colour etc doesnt seem to work. it is also geting quite hot any advice ive tried switching the fans nothing seems to happen. i have changed them once before i did they wouldnt light at all.. not having a good experience with rgb at all...
Link to comment
Share on other sites

If it's getting warm, I would use caution. It has been so long since I used the manual controller, I can't remember if mine got warm or not. It was also in the case with fans blowing at it. I can't think of a good reason why there should be a lot of current passing through it.

 

When you changed fans before, did you change the controller as well?

 

I know this is not what you want to hear, but you are likely to enjoy the HD series a lot more if you integrate them into the Link/iCUE software via a Commander Pro or Lighting Node Pro. The HD were a miss for me at first. Too bright, not very interesting lighting options on the remote. With software control, it is a whole different thing, right down to individual LED control.

Link to comment
Share on other sites

 Share

×
×
  • Create New...