superman276 Posted February 12, 2005 Share Posted February 12, 2005 about 1 year ago i purshased corsair cmx256-3200c2pt twinx ram everything has been ok since recently when my computer would start to randomly reboot so i ran memtest on both sticks individualy one past the test for 12 hours with no errors the other stick failed with errors so i put in another piece of ram (spare) in my computer and i no longer have the rebooting problem computer configuration is: mb abit nf7 cpu 3200+ psu 420 watts the ram voltage when tested was 2.6 and timmings were by spd Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 14, 2005 Corsair Employees Share Posted February 14, 2005 Please set the Dim Voltage to 2.7 Volts and test the suspect module again with http://www.memtest.org and if you still get errors, please send us a email with a copy of the form or all of your info name address and phone# and the Module part# and copy the link to this post and email it to Rma@corsairmemory.com. If after 1 day or 24 hours excluding weekends you do not get the rma please email the same to warranty@corsairmemory.com and we will help to resolve it. Link to comment Share on other sites More sharing options...
superman276 Posted February 14, 2005 Author Share Posted February 14, 2005 I tested the module at 2.7v like you said and still received the same errors. Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 15, 2005 Corsair Employees Share Posted February 15, 2005 Please follow the directions for the RMA and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
emaeteetee Posted February 16, 2005 Share Posted February 16, 2005 Could you please tell me what volt i should test my VS 512MB 400 Corsair ram at? Thanks... :confused: EmTee Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 16, 2005 Corsair Employees Share Posted February 16, 2005 I would suggest 2.7 Volts for most MB's with most of our DDR1 modules. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.