Jump to content
Corsair Community

Commander Pro Malfunctions On Cpu Load


BlakeOzzy64
 Share

Recommended Posts

So this issue is specific to my z370 based 8700K system. As I had all the same hardware running on my Z170 7700K system and everything worked fine.

 

Currently running 6 HD120 Pro fans off of it is fine until I add a CPU load in Aida64 which I was doing to test overclock settings.

As soon as the load is introduced the fans all disappear from LINK and start acting however they like with no obvious patterns of any kind.

 

Stopping Aida returns the fans to LINK but control is not returned and they continue to operate in whatever manner they want and the RPM sensors show anywhere between 0-30000 RPM

 

yes....30000...not a typo...

 

 

Most current version of Link and most current firmware for the commander pro.

Link to comment
Share on other sites

It is not specific to AIDA. Any other monitoring program trying to access the same registers will cause an issue. However, the AIDA one seems to bug me the most because it turns the line graph into a sea of squiggles. The main reason I use aida is for those graphs. Perhaps in the future Link and iCUE will return to their prior standards, but for now it is a nuisance.
Link to comment
Share on other sites

 Share

×
×
  • Create New...