Shaneee Posted May 7, 2018 Share Posted May 7, 2018 Hello folks. So I'm thinking of getting an AIO for my Ryzen 5 2400G and I wish to mount it on the top of the 100R. What dual fan AIO will fit there without much trouble? First time using any kind of water cooling ::pirate:: Thanks Link to comment Share on other sites More sharing options...
rschissler Posted May 8, 2018 Share Posted May 8, 2018 (edited) Probably won't work, based on my recent experience with a H80i and 100R. You should be able to mount in on the front as an intake, but you'd have to lose the drive cage. I have two ML120's mounted to the top, but it is a close fit, and I can't see adding a radiator there. http://forum.corsair.com/v3/showthread.php?t=174465 Edited May 8, 2018 by rschissler Link to comment Share on other sites More sharing options...
Shaneee Posted May 8, 2018 Author Share Posted May 8, 2018 Probably won't work, based on my recent experience with a H80i and 100R. You should be able to mount in on the front as an intake, but you'd have to lose the drive cage. I have two ML120's mounted to the top, but it is a close fit, and I can't see adding a radiator there. http://forum.corsair.com/v3/showthread.php?t=174465 Thanks for the reply. What do you think would stop it fitting? I've only got my SSD with an adaptor in the top drive cage so can remove than and mount the SSD else where if needed. Is there enough width? Link to comment Share on other sites More sharing options...
rschissler Posted May 8, 2018 Share Posted May 8, 2018 I don't think it will fit on the inside of the top, with the thickness of both the fan and radiator, mainly because it will intrude with the memory sticks. Another problem is that since the CPU socket is so close to the top, it would be difficult to maneuver the hoses to there. I assume you looked at my pictures in the link I sent. Link to comment Share on other sites More sharing options...
Shaneee Posted May 8, 2018 Author Share Posted May 8, 2018 I did yeah. Think I'll go for the single fan rad and front mount it then. Seems to work ok. Link to comment Share on other sites More sharing options...
Shaneee Posted May 9, 2018 Author Share Posted May 9, 2018 I don't think it will fit on the inside of the top, with the thickness of both the fan and radiator, mainly because it will intrude with the memory sticks. Another problem is that since the CPU socket is so close to the top, it would be difficult to maneuver the hoses to there. I assume you looked at my pictures in the link I sent. Any suggestions on a 120mm AIO that supports AM4 out the box? Link to comment Share on other sites More sharing options...
rschissler Posted May 9, 2018 Share Posted May 9, 2018 I'd suggest using the Corsair H80i v2, like it did. It comes with mounting hardware for the AM4, as well as Intel sockets. Link to comment Share on other sites More sharing options...
Recommended Posts