jacksula Posted April 27, 2018 Share Posted April 27, 2018 Good friends the matter that I have 6 fan corsair LL and 4 corsair rgb strips and they always worked perfectly with both the first corsair link software and the new corsair cue that is the one that I have installed but it turns out soon to another began to give problems the fan with the lights in the fan that changed colors alone update to the latest drives and it got even worse and only the first fan gives color but in half and the others no longer, I uninstalled the drivers and reinstalled them and nothing installed the corsair link and not only a fan color and half, which may be ?? The led lights do give color normally, Thanks! Link to comment Share on other sites More sharing options...
DevBiker Posted April 27, 2018 Share Posted April 27, 2018 Have you configured the lighting channel again in Link? Did you uninstall both Link and iCue? Link to comment Share on other sites More sharing options...
jacksula Posted April 27, 2018 Author Share Posted April 27, 2018 if correct and it does not let me configure it in either of the two Link to comment Share on other sites More sharing options...
DevBiker Posted April 27, 2018 Share Posted April 27, 2018 I'm not sure that I understand that you cannot configure the lighting channel in either of the two. You should be able to add the fans to the lighting channel. Fans and strips are not auto-detected; you must add them yourself. Link to comment Share on other sites More sharing options...
jacksula Posted April 27, 2018 Author Share Posted April 27, 2018 No me detecta los perfiles guardados, y cuando trato de hacer un perfil nuevo no me deja tampoco solo las tiras led puedo configurar Link to comment Share on other sites More sharing options...
Recommended Posts