bgunn925 Posted April 25, 2018 Share Posted April 25, 2018 Everything was fine until I updated to v3.2.87 Now, the LED strips attached to my LNP keep changing to rainbow. In iCUE, it says it has the correct color scheme, but it actually outputs rainbow. If I switch profiles, the correct colors display for about 10 seconds before it switches back to rainbow Link to comment Share on other sites More sharing options...
DevBiker Posted April 25, 2018 Share Posted April 25, 2018 You don't need to post the same thing on multiple threads. Just a tip. Can you please fill out your system details as well? Finally ... I guess since you uninstalled, there aren't any logs? That makes it pretty impossible for us to assist and/or get the dev team to fix whatever issue it was. Link to comment Share on other sites More sharing options...
bgunn925 Posted April 25, 2018 Author Share Posted April 25, 2018 Sorry, point of other post was to look for old version downloads, but I found one. I reinstalled to the new version and figured I'd just unplug my LNP, rather than recreate the new profiles (problem's still occuring). So that should give me new logs? What specs are relevant? Just Corsair stuff? H100i v2 CLCP -> LL120 x7 LNP -> LED strips x4 Other stuff, just in case: 8700k CPU Strix Z370-E mobo 4x8GB Trident Z RGB 3600MHz CL16 RAM Strix 1060 6GB OC EVGA G3 650W PSU Link to comment Share on other sites More sharing options...
bgunn925 Posted April 25, 2018 Author Share Posted April 25, 2018 Update: looks like even if I select 'No device connected' in the lighting channel, they stay off for about 30 seconds before going rainbow again. Looks like I'm going to have to physically disconnect them. Link to comment Share on other sites More sharing options...
DevBiker Posted April 25, 2018 Share Posted April 25, 2018 It's an issue with static colors and the Lighting Node Pro. I'd seen this with Instant Lighting; I didn't realize that it impacted any static color on the NoPro. But it does. To workaround this ... rather than a static color, set it to "Color Shift". Have the two colors off by 1 value. For example, if you want all red, all the time ... set color 1 to 255, 0, 0 and then color 2 to 255, 1, 0. Your eyes won't see the difference but it'll force iCue to update the color values for the NoPro's RGB channels. And all system specs are relevant. Please use the link "Edit System Specs" at the top. Link to comment Share on other sites More sharing options...
vholif2137 Posted April 25, 2018 Share Posted April 25, 2018 (edited) I'm getting the same thing on 2 LNP's, and my CoPro also. I'll get the logs tonight after work. It seems to be going back to hardware default? I tried forcing firmware updates on those devices to no avail. Same with XOC running or not, and Aura uninstalled. *Edit*I see your suggestion now and will try it tonight..... Edited April 25, 2018 by vholif2137 Link to comment Share on other sites More sharing options...
bgunn925 Posted April 25, 2018 Author Share Posted April 25, 2018 It's an issue with static colors and the Lighting Node Pro. I'd seen this with Instant Lighting; I didn't realize that it impacted any static color on the NoPro. But it does. To workaround this ... rather than a static color, set it to "Color Shift". Have the two colors off by 1 value. For example, if you want all red, all the time ... set color 1 to 255, 0, 0 and then color 2 to 255, 1, 0. Your eyes won't see the difference but it'll force iCue to update the color values for the NoPro's RGB channels. And all system specs are relevant. Please use the link "Edit System Specs" at the top. Very clever, this worked. I have a 10-color gradient and it would have been a pain to remake all 10 colors as a Color Shift but it looks like you only need one LED with a time-dependent effect to keep the rest from changing. Thanks! Link to comment Share on other sites More sharing options...
vholif2137 Posted April 26, 2018 Share Posted April 26, 2018 Worked for me too! Thanks DevBiker! Link to comment Share on other sites More sharing options...
Whisky Lima Posted April 28, 2018 Share Posted April 28, 2018 Yes it's a problem with any channel that remains static, even if you turn the LED's off. Keeping the channel animated will solve it for now. Link to comment Share on other sites More sharing options...
ShadowSabre Posted May 6, 2018 Share Posted May 6, 2018 Have they fixed this issue yet I am using 3.1.133 so I don't have the flickering Link to comment Share on other sites More sharing options...
Paul S Posted May 13, 2018 Share Posted May 13, 2018 Ive just installed link until all the problems are patched Link to comment Share on other sites More sharing options...
Recommended Posts