Mapantz Posted April 25, 2018 Share Posted April 25, 2018 (edited) I've just updated to 3.2.87 and I cannot turn my fans off or have them low anymore. I had a custom fan curve for just simple tasks, so the speeds were set to minimum below 40C. Basically, you can't have them on low speeds if you set your own fan curve. This might be beta software, but it just get's worse and worse! Edited April 25, 2018 by Mapantz Link to comment Share on other sites More sharing options...
Corsair Employees Corsair James Posted April 25, 2018 Corsair Employees Share Posted April 25, 2018 According to the design of Commander Pro, it was not designed to have zero RPM on the fan curve. Furthermore, this is because not all fans are capable of being disabled completely per my knowledge from asking the cooling team. We will change the ability to set this in a future update. The lowest RPM will be at 20%. Link to comment Share on other sites More sharing options...
Mapantz Posted April 25, 2018 Author Share Posted April 25, 2018 According to the design of Commander Pro, it was not designed to have zero RPM on the fan curve. Furthermore, this is because not all fans are capable of being disabled completely per my knowledge from asking the cooling team. We will change the ability to set this in a future update. The lowest RPM will be at 20%. huh? Well I had zero RPM before the update... I would set it to that when I went to bed (as my machine stays on 24/7) Regardless of the zero RPM, I can no longer set my fans to the lowest RPM while they're on. This update has stuffed all of my custom fan curves. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair James Posted April 25, 2018 Corsair Employees Share Posted April 25, 2018 (edited) huh? Well I had zero RPM before the update... I would set it to that when I went to bed (as my machine stays on 24/7) Regardless of the zero RPM, I can no longer set my fans to the lowest RPM while they're on. This update has stuffed all of my custom fan curves. The software enabling zero RPM was not intentional. When I asked the product manager for the Commander Pro, he has requested we remove this. Hence, the software will be updated to remove this properly. I want to emphasize this is a PRODUCT design and we as the software team is being told to remove it. The bug I see is that it shows 0 RPM and is not changing the speed to the minimum RPM instead. We will resolve this in a future update. Edited April 25, 2018 by Corsair James Link to comment Share on other sites More sharing options...
xMacias Posted April 25, 2018 Share Posted April 25, 2018 For your Quiet fan curve, instead of putting it at 0 RPM at the lower temps, set to to around 600 or around the "minimum" allowed for your fans. Link to comment Share on other sites More sharing options...
Mapantz Posted April 25, 2018 Author Share Posted April 25, 2018 The software enabling zero RPM was not intentional. When I asked the product manager for the Commander Pro, he has requested we remove this. Hence, the software will be updated to remove this properly. I want to emphasize this is a PRODUCT design and we as the software team is being told to remove it. Well thanks for telling us. Removing stuff with no mention that it wasn't intentional? Why is software being released with things that aren't supposed to be in there? This may be a preview, but does anyone have a clue as to what they're are doing? Honestly.. it's an absolute joke! The incompetence levels are off the charts! I swear I've even seen in videos for icue, mentioning zero RPM for light tasks?! I started using it after I found out it could be done, because there's no need for some fans to be on when nothing is being used. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair James Posted April 25, 2018 Corsair Employees Share Posted April 25, 2018 Well thanks for telling us. Removing stuff with no mention that it wasn't intentional? Why is software being released with things that aren't supposed to be in there? This may be a preview, but does anyone have a clue as to what they're are doing? Honestly.. it's an absolute joke! The incompetence levels are off the charts! I swear I've even seen in videos for icue, mentioning zero RPM for light tasks?! I started using it after I found out it could be done, because there's no need for some fans to be on when nothing is being used. First, software development is robust not absolute. This means things can change per the request of anyone. Sometimes things are done with a misunderstanding or incorrect specifications based on multiple number of reasons. Video games for example have this same problem and that is why patches exist. Second, this is a beta/early access for a reason. When dealing with a complicated software like iCUE, which controls more than 70+ products, things will be missed. There is no other software like iCUE. I'm sorry if your expectations are unrealistic and you think things can be done perfect from the first go. If you are capable of such a feat, I am always happy to hear feedback on how to improve. Finally, yes ZERO RPM is a custom cooling mode that is built into our newest coolers like the H115i PRO and the H150i PRO.But even in those coolers, you cannot engage ZERP RPM mode in custom curves. Link to comment Share on other sites More sharing options...
Mapantz Posted April 25, 2018 Author Share Posted April 25, 2018 Finally, yes ZERO RPM is a custom cooling mode that is built into our newest coolers like the H115i PRO and the H150i PRO.But even in those coolers, you cannot engage ZERP RPM mode in custom curves. I'm not talking about coolers. I'm simply talking about my LL fans. I see no posts from anyone at Corsair saying that setting the fans to zero is not intentional, and that it will be removed in a future version. It has been 4 weeks since icue became available, and it that time, it has allowed me to set any of my LL fans to zero. And now you suddenly remove that option and only mention it because I presumed it was a bug in the latest version. That is completely unacceptable. Link to comment Share on other sites More sharing options...
xMacias Posted April 25, 2018 Share Posted April 25, 2018 You should be able to create a Cooling Mode with it at fixed 0% Fixed RPM for that. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair James Posted April 25, 2018 Corsair Employees Share Posted April 25, 2018 I'm not talking about coolers. I'm simply talking about my LL fans. I see no posts from anyone at Corsair saying that setting the fans to zero is not intentional, and that it will be removed in a future version. It has been 4 weeks since icue became available, and it that time, it has allowed me to set any of my LL fans to zero. And now you suddenly remove that option and only mention it because I presumed it was a bug in the latest version. That is completely unacceptable. "First, software development is robust not absolute. This means things can change per the request of anyone. Sometimes things are done with a misunderstanding or incorrect specifications based on multiple number of reasons. Link to comment Share on other sites More sharing options...
DevBiker Posted April 25, 2018 Share Posted April 25, 2018 Why is software being released with things that aren't supposed to be in there? This may be a preview, but does anyone have a clue as to what they're are doing? Honestly.. it's an absolute joke! The incompetence levels are off the charts! It's called a bug. All software has bugs. It's not incompetence, it's reality. Deal with it. Unless you think you'd write perfect, bug free software? I swear I've even seen in videos for icue, mentioning zero RPM for light tasks?! I started using it after I found out it could be done, because there's no need for some fans to be on when nothing is being used. There is "Zero RPM" mode for the Pro Coolers. That's it. Link to comment Share on other sites More sharing options...
donalgodon Posted April 25, 2018 Share Posted April 25, 2018 According to the design of Commander Pro, it was not designed to have zero RPM on the fan curve. Furthermore, this is because not all fans are capable of being disabled completely per my knowledge from asking the cooling team. We will change the ability to set this in a future update. The lowest RPM will be at 20%. I updated from the previous beta to v3.2.87 and all my fans were at 0 RPM and were physically not spinning. When I first opened the updated version, the fans didn't show up at all. Then they appeared, but would not respond. It took me a few minutes to notice. I had to reset all my fan curves to get them to work again. Link to comment Share on other sites More sharing options...
Napascj Posted April 25, 2018 Share Posted April 25, 2018 So it was a ‘mistake’ that the Commander Pro was ever to allow zero RPM? A mistake that made it through ALL versions of Corsair Link and the initial Corsair iCUE software, yet it’s now removed? It worked fine? I won’t be updating to this version. Having the ability to turn off my fans when they’re not needed was one of the main reasons I purchased this cooling setup.. Link to comment Share on other sites More sharing options...
Recommended Posts