SEERREUS Posted April 23, 2018 Share Posted April 23, 2018 I have a 570x case that comes with the sp120 rgb led hub and led controller. I bought the ML120 rgb 3 pack that comes with node pro and another led hub, and the commander pro. I installed the commander pro and ran all six rgb connectors to the led hub and used the supplied cable to connect to the copro. All fans work great, full control, but only rgb lights on the 3 ML120's work. I still have another hub and the lighting node pro. Do I have to run the SP120's to there own hub and back to copro? Link to comment Share on other sites More sharing options...
DevBiker Posted April 23, 2018 Share Posted April 23, 2018 You cannot have SP and ML RGB fans on the same hub. They will need to be on separate hubs and separate channels. Take a look at the RGB FAQ linked in my signature for this and a whole lot more. Link to comment Share on other sites More sharing options...
SEERREUS Posted April 23, 2018 Author Share Posted April 23, 2018 Thank you, that sucks. Link to comment Share on other sites More sharing options...
Recommended Posts