Marmite_II Posted April 20, 2018 Share Posted April 20, 2018 Hello Settings don't stay active after restart. Always default to Quite. Want balance to be active all the time even after multiple start ups. Is this a problem with program or need to be fixed :(: Link to comment Share on other sites More sharing options...
DevBiker Posted April 20, 2018 Share Posted April 20, 2018 I'm not seeing the same behavior with my H115i Pro. Can you export your logs (Settings/Export System Info And Logs) and post here? Link to comment Share on other sites More sharing options...
c-attack Posted April 20, 2018 Share Posted April 20, 2018 (edited) Is it just the fan and pump speed/control points? Or do lighting colors reset too? Are there any other iCUE/Link devices connected? Edited April 22, 2018 by c-attack Link to comment Share on other sites More sharing options...
DevBiker Posted April 20, 2018 Share Posted April 20, 2018 Also ... what profile do you have at the top of the profile list? Because that's the one that will be used ... if these settings are in a different profile than the one at the top, this will happen. Perhaps that's the problem? Link to comment Share on other sites More sharing options...
Marmite_II Posted April 21, 2018 Author Share Posted April 21, 2018 (edited) I'm not seeing the same behavior with my H115i Pro. Can you export your logs (Settings/Export System Info And Logs) and post here? Ok I need to clarify I want my Keyboard to be different colour. Prefer some "static layout" Pump and Memory can be Rainbow. Is this possible. Ok what I have done Removed "Default setting" and loaded a static keyboard profile. I cant handle "RainBow" effect. Then pump I selected "lightning" Rainbow" Memory I did the same as above.Logs.zip Edited April 21, 2018 by Marmite_II Link to comment Share on other sites More sharing options...
Marmite_II Posted April 21, 2018 Author Share Posted April 21, 2018 Is it just the fan speed/control points? Or does lighting colors reset too? Are there any other iCUE/Link devices connected? Yes 1) Strafe RGB Keyboard 2) Pump H115i Pro 3) Vengeance RGB memory These are the devices. Link to comment Share on other sites More sharing options...
c-attack Posted April 21, 2018 Share Posted April 21, 2018 I was wondering if you were also seeing the glitch described in this thread. http://forum.corsair.com/v3/showthread.php?t=176404 It appears to reset the fan curves, but leave other customized settings intact. It only happened to me once over two weeks of using it, so a daily reset may or may not be related. Link to comment Share on other sites More sharing options...
ChriscomIT Posted April 21, 2018 Share Posted April 21, 2018 Same here. Only fan and pump resets to quiet every time I reboot. Other settings stay. H100iGTX and Venegance LED RAM. Link to comment Share on other sites More sharing options...
Marmite_II Posted April 21, 2018 Author Share Posted April 21, 2018 (edited) Hi All What I have don so far. Selected H115i Pro. Then selected all devices from slider button.(shows Quit, Balanced....Zero RPM. Then it says Edit All devices, I selected "Balanced". Did two PC re-boot's fine so far. Fans show up as "Balanced" See if this works for me. No it did not. After power down and this morning power Up setting gone. Back to default. Edited April 22, 2018 by Marmite_II Link to comment Share on other sites More sharing options...
Marmite_II Posted April 23, 2018 Author Share Posted April 23, 2018 (edited) Hi all It seems to be working for me currently. Since I started playing around with "Custom" fan profiles. Only now it seems to be working.All ok even after a couple of PC reboot's It does not work when selecting "Balanced" only. No curve profile for Fans. Edited April 23, 2018 by Marmite_II Link to comment Share on other sites More sharing options...
Recommended Posts