Jump to content
Corsair Community

adding LL120 fans and LL140 fans and SP120 Fans to the same Lighting Node Pro Unit


Ayham
 Share

Recommended Posts

hi,

I recently bought the Corsair Crystal 570X, and it comes by default with 3 fans of SP120 with its hub and controller.

I am thinking of adding an addtional 3 extra Fans to the case, 2 fans of LL140 to the top panel and 1 fan LL120 to the back.

I was wondering if I can connect the Hub with the 3 SP120 fans connected to the first channel of the Lighting Node Pro Unit. and connect the LL120 and the two LL140 fans to another Hub and connect it to the second channel of the Lighting Node Pro Unit.

Does this configuration is legal?, if Not, what shall I do to add the following Fans without using CoPro.

Link to comment
Share on other sites

Yes, you can have different fan types on the same Lighting Node Pro as long as they are on different channels. You cannot mix them on the same channel/Fan Hub.

 

Make sure that you get the LL140 multipack; that'll have an additional fan hub (which you'll need) and the Lighting Node Pro.

 

And have a look at the RGB FAQ ... it's linked in my sig.

Link to comment
Share on other sites

 Share

×
×
  • Create New...