Arashai Posted April 14, 2018 Share Posted April 14, 2018 So i cant seem to figure this out, maybe I'm just over complicating it. I got a corsair 570x, motherboard, asus prime z370-A, and a h150i pro AIO, for the rig backstory, heh. I bought 6 LLRGB 120s, and the aio comes with the 3 ml 120s. My question is how do I best hook all 9 of those fans up? I was going to hook up 3 LLs, and 3 ML, in push pull config on aio btw. Anyways, any help appreciated, thanks in advance. Link to comment Share on other sites More sharing options...
DevBiker Posted April 14, 2018 Share Posted April 14, 2018 I would encourage you to give a good read-through of both the cooler FAQ and the RGB FAQ that are linked in my signature. Link to comment Share on other sites More sharing options...
Arashai Posted April 14, 2018 Author Share Posted April 14, 2018 (edited) Yeah I gave those a good look over before i decided to post actually. I think I understand generally what's needed, i guess the follow up question I was really pondering was, am I going to have to purchase a commander pro for what I'm trying to accomplish. I can see the basic setup for the 6 LL120s no problem. My wrench was throwing those 3 MLs into the mix, I assume if just add another rgb hub to plug those 3 in then I wouldn't be able to adjust their rpm through link. Was kind of hoping I'm not thinking of something and I could just use some spots on my mobo for the 3 MLs. Edited April 14, 2018 by Arashai Link to comment Share on other sites More sharing options...
DevBiker Posted April 14, 2018 Share Posted April 14, 2018 Three of the fans - probably the 3 MLs - should be connected to the cooler for power and RPM control. The rest can go on the CoPro. I would refrain from putting more than 2 on a single header with a splitter. The MLs that come with the cooler don't support RGB and the RGB hub doesn't control fan speed anyway - only the RGB functionality. Link to comment Share on other sites More sharing options...
Arashai Posted April 14, 2018 Author Share Posted April 14, 2018 Ahhh. See I knew I was just being absent minded haha. I'm a first time builder, so I totally wasnt thinking / forgot that the MLs can be plugged right into the pump! :bigeyes: Should he throwing this all together next week, so hopefully it all goes well! Thanks for the help! Link to comment Share on other sites More sharing options...
DevBiker Posted April 14, 2018 Share Posted April 14, 2018 Ahhh. See I knew I was just being absent minded haha. I'm a first time builder, so I totally wasnt thinking / forgot that the MLs can be plugged right into the pump! :bigeyes: Should he throwing this all together next week, so hopefully it all goes well! Thanks for the help! It's all good. Feel free to ask if you have further questions with the build! Link to comment Share on other sites More sharing options...
Recommended Posts