Jump to content
Corsair Community

FarCry 5 not using fans 5 and 6 in iCue


Kvantum
 Share

Recommended Posts

I'm running iCue just fine and it's handling FarCry 5 integration like a dream... except it never makes use of fans 5 and 6 in my system.

 

My setup is a Mirror Black 570X and an H150 with fans 1-3 in the front, fans 4 and 5 as exhaust in the top, and fan 6 as the rear exhaust. All fans are LL 120s on Lighting Channel 2 of a Commander Pro. (The H150 is also mounted with the 3 ML120s it came with as the Pull fans, if it might matter, but they are controlled through the H150 itself.)

 

Also, I do have the RGB logos of the case itself set up in the Commander Pro as a single SP fan on Lighting Channel 1, but the logos do work normally in-game. All firmware is up to date, Win 10 Pro 64, build 16299.371.

Edited by Kvantum
Link to comment
Share on other sites

The effect file in the Program files\Corsair\Corsair Utility Engine\GameSdkEffects\FarCry5 does not have enough entries for all the leds in that many fans. I have a previous post on it.

Id looked like a bit of work so I didn't do it hoping they might fix it.

Link to comment
Share on other sites

 Share

×
×
  • Create New...