Umer Posted April 9, 2018 Share Posted April 9, 2018 Hi guys, I have a minor problem. I recently bought the vengeance RGB RAM (2×8GB, 3000 MHz), and it's installed on the Asus ROG Strix z370-e gaming. I use Aurasync to control all the lighting including RAM, but noticed that when on the rainbow mode, one RAM stick changes colour slightly after the other. Also on the Colour Cycle mode, the RAM lights turn completely off. Moreover, when the PC is in sleep, all the RGB components turn off (I set it so in Aura), but the RAM is stuck on whatever colour it was. Can someone please help me as I'm new to RGB. Thank you very much for your time. Link to comment Share on other sites More sharing options...
Calious Posted April 10, 2018 Share Posted April 10, 2018 Might just be easier to use Corsair Link? That's what I'm using. LINK for my cooler and RAM Aura for my Mobo and GPU Link to comment Share on other sites More sharing options...
Umer Posted April 10, 2018 Author Share Posted April 10, 2018 But my other components (motherboard, aio pump + fans, strip in future) are controlled by Aura and would prefer the RAM to be on the same software. If I use Link, the rainbow effect could go out of sync. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Art Posted April 10, 2018 Corsair Employees Share Posted April 10, 2018 I'd have to recommend you use Link for the time being. -Art Link to comment Share on other sites More sharing options...
Umer Posted April 10, 2018 Author Share Posted April 10, 2018 Ok, I'll see if it makes a difference Link to comment Share on other sites More sharing options...
Recommended Posts