Calious Posted April 8, 2018 Share Posted April 8, 2018 Hi all, I've just finished my first build in a LONG time, and had the joy of using mostly Corsair parts. I've got a H115i Pro on my rig atm, and it's great... or it was. We're 24 hours in and it seems to refuse to let me change the colours etc now. Link is showing it, and showing the colours it should be, but it's refusing to actually change. It's sat in an orange/red colour and won't change. Any ideas? I'm on the latest Link version. The RGB RAM is fine, that's doing as it's told. Just the Cooler isn't, I preferably wanted it temp based off of the process temp so I could have it go red if it got really high. This was being funny, as it'd work most of the time, and sometimes set itself back to the basic rainbow. Then i realised I could save a default to the device, so I did that. But now it's just not doing anything except sitting there being red. Link to comment Share on other sites More sharing options...
Calious Posted April 8, 2018 Author Share Posted April 8, 2018 Old Version of the software as the new one doesn't play nice with the pro coolers. My bad. Link to comment Share on other sites More sharing options...
c-attack Posted April 9, 2018 Share Posted April 9, 2018 Use Link 4.9.5.xx. Version 4.9.6 has this effect on the PRO coolers and you can find more company in the Link section of the forum. You can also try the iCUE/CUE 3 beta download. It’s pretty different looking, but has some other benefits. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Lettuce Posted April 11, 2018 Corsair Employees Share Posted April 11, 2018 This issue is known and is currently being worked on, it should be resolved with the next version of Link itself. Link to comment Share on other sites More sharing options...
Recommended Posts