Jump to content
Corsair Community

Lighting node Pro, Everything is bright white/ not lit


Scrogdor
 Share

Recommended Posts

Hey guys, first time posting here. I Installed the lighting node pro, connected 4 RGB strips to it, and also have a fan hub with 3 Sp120's and 2 ML 140 pro's in it.

 

I can see the lighting node pro in corsair link, it says it's up to date with firmware 0.5.104. but..

 

Both of my ML 140 pro's are just white with no option to control them.

All three SP 120's are no longer lit.

And the 4 LED strips are all bright white and kind of flicker a little bit.

 

I try to change the colors in corsair LINK but it doesn't work. Help please.

Link to comment
Share on other sites

How do you have the lighting channels configured?

 

And ... you absolutely cannot have the SP fans and any of the other RGB fans on the same channel. They are different LEDs and have different control signals. With HD, ML and LL fans, you can kinda get away with mixing them on the same channel but the effects won't be quite right. You absolutely cannot do that with the SP's.

Link to comment
Share on other sites

How do you have the lighting channels configured?

 

And ... you absolutely cannot have the SP fans and any of the other RGB fans on the same channel. They are different LEDs and have different control signals. With HD, ML and LL fans, you can kinda get away with mixing them on the same channel but the effects won't be quite right. You absolutely cannot do that with the SP's.

 

What do you mean Lighting Channels? And yeah I was afraid of that. I'll have to get some different fans then for the front?

 

So far I dont even have the hub plugged in, I'm just trying to get the LED strips to work but can't. I actually unplugged them and plugged them back in, and now only one or two nodes on each strip is lit up.

Link to comment
Share on other sites

 Share

×
×
  • Create New...