Jump to content
Corsair Community

What will i need to run RGB fans?


sha33
 Share

Recommended Posts

Hi everyone,

 

I will have 2x480mm rad + 1X360mm rad. Each one will be having pushpull corsair HD120 RGB fans.

 

so, 22 fans + 2 cases Fans, total 24 fans.

And i would like to have 2 corsair RGB led strips.

 

How many commander pro/lighting node pro will i need to runs all of these and to be able to control them trough corsair LINK? And how should i connect them?

 

Thanks !

Link to comment
Share on other sites

Hi buddy.... have a read of this

 

http://forum.corsair.com/v3/showthread.php?t=173880

 

should help you gauge what you need and how it hooks up ;)

 

My guestimate is 2 Commander Pro's and use some pwm splitters for fan control.. 2 RGB Fan LED hubs (12 fans) per commander pro for RGB control and a Lighting node pro for the Strips....

 

Technically PWM splitters are not supported by Corsair for the Commander Pro.. but its power limits are 1A per fan header and a 4.5A limitation for the entire unit. and HD120 fans Rated current is 0.30A..... so do your Math!

Edited by Zotty
Link to comment
Share on other sites

 Share

×
×
  • Create New...