Jump to content
Corsair Community

Void won't go into Pairing mode


Neuromancer1984
 Share

Recommended Posts

Got a new dongle for the old broken one, but the pairing wouldn't work--the new dongle would start flashing properly when the button was pressed with a paperclip, but holding the power button on the headset won't put it into the flashing green/red pairing mode I've read about. It just stays on, changing to different colors no matter how long I hold it, or if I release after ~3 seconds it turns off. Holding it while turning it on also does nothing.

 

Tried a firmware flash in CUE which I suppose might've been a mistake, it couldn't download anything, even with the headset plugged in via USB cable, so I had to abort that.

 

This is getting really frustrating. Any ideas on what to do?

Link to comment
Share on other sites

I have a Void Pro wireless. This one: https://www.amazon.com/CORSAIR-Wireless-Headset-HEADPHONE-Surround/dp/B0748N6796/ref=as_li_ss_tl?tag=amazongs-20&ie=UTF8&linkCode=sl1&linkId=2487a6739d4f804ef65bf465c4f4a622&th=1

 

The only different numbers on the dongles are the P/N and S/N numbers, and the original is yellow while the replacement is grey.

Link to comment
Share on other sites

 Share

×
×
  • Create New...