nam.uk Posted March 22, 2018 Share Posted March 22, 2018 I have connected this to all the usb headers direct even a usb-c extension to fresco Pci-E card, on latest link and firmware, this is also my second Pro this is showing just one fan connected and No NODpro connected but i have had 3 120mm and 2 140 LL fans connected also NOD Pro with Led strips, and i have no issues controlling the Leds on fans or strips, the issue is fan speeds also there is no volts showing at all. i did get randomly fans showing and dropping out but all i get now is as seen in Image attached. is this unit faulty? all other link devices work fin as well. http://i10.photobucket.com/albums/a150/NMUN/Capture_zpsnadxmegv.png' alt='Capture_zpsnadxmegv.png'> Link to comment Share on other sites More sharing options...
nam.uk Posted March 24, 2018 Author Share Posted March 24, 2018 All linked up,i am so happy the pro is in charge. answers on a postcard http://i10.photobucket.com/albums/a150/NMUN/pro_zpshoylchai.png' alt='pro_zpshoylchai.png'> Link to comment Share on other sites More sharing options...
DevBiker Posted March 24, 2018 Share Posted March 24, 2018 WHich version of Link? Regarding the power ... can you check on the power being supplied to the CoPro. Perhaps try another connector? Are you using any adapters? Link to comment Share on other sites More sharing options...
nam.uk Posted March 24, 2018 Author Share Posted March 24, 2018 latest link and firmware also sata is direct to the AX psu with pro. at moment i have the pro connected direct to usb header/sata power and one led strip and info in link fluctuates random in volts, even 2 fans show up that are not connected? yet the led strip works flawless, well anything led works just not anything led. this driving me absolutely mad, nothing is this hard theses days and getting to the conclusion this pro uses crap hardware inside the unit. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.