Jump to content
Corsair Community

B250 Board, 3200mhz DDR4 and Timings


blackops
 Share

Recommended Posts

Hello, everyone,

 

I need some advice about memory timings please. I bought a kit of DDR4 3200mhz ram (CMK8GX4M2B3200C16) for a B250 board and need some help with the timings. The maximum speed the board can run this memory is 2400mhz. Loading the XMP profile yields 2400mhz 16-18-18-36 2T and the manual setting yields 2400mhz 17-18-18-40 2T.

 

I think the timings can be tightened a little but what would be the recommended 2400mhz timings for this memory?

Link to comment
Share on other sites

Mosts kits rated for DDR4-3200 16-18-18 should easily run DDR4-2400 at timings like 13-15-15 or even lower if you raise the memory voltage from 1.20V to the 1.35V they are specced for.

 

Edit: For reference my old Corsair Vengeance LPX CMK16GX4M4A2800C16 (Ver5.29) did DDR4-2400 13-13-13-31 1T at 1.22V on Skylake.

Link to comment
Share on other sites

Which version of the bios do you have installed? If latest, still reflash it and see if the profile does a bit better.

 

I have the latest bios, F10b, motherboard B250 HD3P. I don't wish to sound rude but what would flashing with the same bios achieve?

Link to comment
Share on other sites

 Share

×
×
  • Create New...