Jump to content
Corsair Community

Problems LL RGB and Corsair Link


Frosty4652
 Share

Recommended Posts

Good afternoon! Could you help me in solving the problem? Suddenly, while the computer was working, the fans started to misunderstand themselves, the program had a choice of all Duga fans, they all began to glow differently, like a software failure, eventually checked everything, everything was connected to the controllers, there were new controllers that never connected, changed them but the problem did not dare! Now just like that, there is a fan running, at any time a podvetchetsya podstvetka at any of the 6 fans,

View all images

 

http://prntscr.com/ipp25u

http://prntscr.com/ipp28p

http://prntscr.com/ipp2b1

 

:Сумасшедший:

Link to comment
Share on other sites

Hello! Fortunately, my wife understands Russian (a little dated as she left in 1980) but it was enough to help me understand.

 

I would suggest that you start with re-arranging the fans on the fan hub. The fans operate in a series and 1 fan can take out the entire chain. Put 1 fan on the first port on the fan hub and see if that operates properly. If so, add the second fan. And so on. However, just because a single fan works does not mean that it will pass the signal down the line to the next fan so remember that as you are reordering them.

Link to comment
Share on other sites

Hello! Fortunately, my wife understands Russian (a little dated as she left in 1980) but it was enough to help me understand.

 

I would suggest that you start with re-arranging the fans on the fan hub. The fans operate in a series and 1 fan can take out the entire chain. Put 1 fan on the first port on the fan hub and see if that operates properly. If so, add the second fan. And so on. However, just because a single fan works does not mean that it will pass the signal down the line to the next fan so remember that as you are reordering them.

 

All reconnected, earned only 2 fans

Link to comment
Share on other sites

 Share

×
×
  • Create New...