Frattastic Posted March 9, 2018 Share Posted March 9, 2018 Hello, This is my first build and especially first time dealing with RGB hardware. I purchased the Corsair Commander Pro, 3 HD120 RGB Fans, and the Corsair Lighting Node Pro. Starting with the Corsair Commander Pro it is hooked into the USB1 header on my motherboard and the power is connected to a sata connection that is also powering a hard drive on the same cable (cable has multiple sata power connectors on it.) The Lighting Node LED Strips are all connected to each other ending at being connected to the LED1 header on the Commander Pro. The 3 fans are connected to ports 1-3 on the Commander Pro and the power for each are connected to the PUMP_FAN1, SYS_FAN3, and SYS_FAN4 ports on the motherboard. All the fans are spinning and the speed is controllable in Corsair Link. So to sum it all up i've got 3 fans, and 4 daisy chained LED strips connected to the commander pro (which is being detected in the software, just updated the firmware) but the LED strips aren't working at all and the RGB for the fans aren't working. Please help a first time builder! Thank you! Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.