Jump to content
Corsair Community

help plz :)


spidersin

Recommended Posts

hi ram guy

 

i having problem with Corsair XMS3200XL DDR-DIMM 512MB PC3200 i put them in 1-2 and 3-4 but it keeps crashing...

 

sometimes there is a bule screen comes up about the ram or something but i have no idea i tryed everything

 

my setup is

 

amd 64 3500+

GA-K8NSNXP-939

Corsair XMS3200XL DDR-DIMM 512MB PC3200

WD 120Gb 7200 8Mb Cache Hard Disk

Sound Blaster Audigy

ati 9600pro

i did the ram test and on test 7 its so many error come up on both ram in and one at a time

 

all windows is up to date,bois is f8,sound card drivers,video drivers ect,

Link to comment
Share on other sites

  • Corsair Employees

Please make sure that you have the latest BIOS for your MB and load Setup/optimized default settings, and try the following BIOS settings;

TwinX1024 or TwinX512-3200XL

Advanced Chipset Features (Ctrl + F1)

DRAM Clock: 400 MHz

Configure Dram timing by SPD: Disabled/User define

SDRAM CAS Latency: 2T

SDRAM RAS to CAS Delay (tRCD): 2T

SDRAM Row Precharge (tRP): 2T

SDRAM Active to Precharge Delay (tRAS): 5T

SDRAM Burst Length: 8

SDRAM Bank Interleave: 4/Auto/Enabled

SDRAM Command Rate: 1T

Frequency Voltage Control

CPU Freq: 200

Memory or Dim Reference voltage: 2.7/2.75 Volts (+.2)

AGP Voltage: Default *unless you have ATI 9200 or 9600 then 1.6 Volts suggested!*

All other settings should be set to default settings!

Then please test them one at a time with http://www.memtest.org and let’s make sure it's not some other issue! I would run the test for at least 2-3 passes to be sure!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...