Jump to content
Corsair Community

h110i fan controll #2


cawzie
 Share

Recommended Posts

My #2 fan on the y-spliter from the cpu watercooler h110i is stuck at 615rpm. #1 works fine it adjusts to temps and such. Fan #2 is not adjusting for temps or when when I manually try to adjust the RPM. I tried the fan on the motherboard header and it works just fine for adjusting the RPM but not through the watercooler/link software. To confirm, when its plugged into the watercooler the 2nd fan wont adjust the RPM based on what corsair is telling it but when I try disconnecting and plugging it into the motherboard the fan works fine.

 

 

 

Any ideas?

Link to comment
Share on other sites

Switch the two fan leads on the cooler to confirm it stays with fan channel #2. Does it respond to any of the Link commands for max speed, %, or fixed rpm? If still no, contact Corsair tech support. Immediate solution may be to run a standard 4/3 PWM splitter from channel 1 to regain control.
Link to comment
Share on other sites

 Share

×
×
  • Create New...