Jump to content
Corsair Community

570x Mirror 3.5in drive bays?


boydsoule
 Share

Recommended Posts

Either:

 

- Wait for extra SSD brackets to appear on the 'Parts & Accessories' store page, buy one and then move the RGB hub to another position in the case so that you can attach a third SSD mount (Or contact Corsair to see where you can buy one)

 

- Purchase one of the following 3.5inch to SSD adapters which will allow you to place SSD's in the HDD trays

 

http://www.corsair.com/en-gb/dual-ssd-mounting-bracket

http://www.corsair.com/en-gb/ssd-mounting-bracket

Edited by Napascj
Link to comment
Share on other sites

 

- Purchase one of the following 3.5inch to SSD adapters

 

He wants extra 3.5inch bays dude..

 

but if I wanted to add more than 2 3.5 in drives

 

Will be tight buddy... very tight.

 

WmNR806.jpg

 

those are your only options really... and I doubt there is enough space to next to the SSD's. and heat down in the PSU shroud could be an issue

Link to comment
Share on other sites

I was thinking of maybe going MacGyver and using some industrial Velcro to attach the 3rd 3.5 HHD to the case somewhere...right now the drive is in an external hdd dock but I would like to get that off of my desk if I could.

 

Velco under the desk?

  • Confused 1
Link to comment
Share on other sites

Is there room under the case for a drive? No i was thinking of putting it over where the PSU shroud is located up front somewhere or seeing if I could put it where one of the SSD brackets are. At the moment my drive is sitting in a HHD dock on my desk behind my monitor but would like to get rid of the dock and put the drive inside the case if I can.
Link to comment
Share on other sites

 Share

×
×
  • Create New...