Jump to content
Corsair Community

anyone have tight timmings for CMU16GX4M2C3200C16


always_winter
 Share

Recommended Posts

z370 and a i7 8700k. i have presets on my board but i need to know if its single sided or double sided or some help from here

 

Memory Module

Manufacturer

Corsair

Series

Vengeance LED

Part Number

CMU16GX4M2C3200C16

Serial Number

00000000h

JEDEC DIMM Label

8GB 1Rx8 PC4-2133P-UA0-10

Architecture

DDR4 SDRAM UDIMM

Speed Grade

DDR4-2133P downbin

Capacity

8 GB (8 components)

Organization

1024M x64 (1 rank)

Register Model

N/A

Manufacturing Date

Undefined

Manufacturing Location

Taiwan

Revision / Raw Card

0000h / A0 (8 layers)

DRAM Components

Manufacturer

Hynix

Part Number

H5AN8G8NAFR-TFC

Package

Standard Monolithic 78-ball FBGA

Die Density / Count

8 Gb A-die (21 nm) / 1 die

Composition

1024M x8 (64M x8 x 16 banks)

Clock Frequency

1067 MHz (0.938 ns)

Minimum Timing Delays

15-15-15-36-50

Read Latencies Supported

16T, 15T, 14T, 13T, 12T, 11T, 10T...

Supply Voltage

1.20 V

XMP Certified

1600 MHz / 16-18-18-36-54 / 1.35 V

XMP Extreme

Not programmed

SPD Revision

1.0 / January 2014

XMP Revision

2.0 / December 2013

Edited by always_winter
Link to comment
Share on other sites

Your kit is single sided / single rank and uses Hynix 8Gbit AFR ICs.

 

If you are ok with higher voltages you might be able to tighten the primary timings down to 15-17-17 / 15-16-16 or even 14-16-16. However there is more performance hidden in the secondary and tertiary timings.

 

Try how close you can get to the subtimings for my XMP full custom result: http://forum.corsair.com/forums/showthread.php?t=174828

Link to comment
Share on other sites

 Share

×
×
  • Create New...