Jump to content
Corsair Community

Recommended Posts

Hello all, this is the build I've been working on with the 460x case and h150i cooler. I really like both the case and the cooler. I decided to do a push/pull setup on the radiator using the SP 120 fans up front and a pair of the stock ML 120 fans on the back side. I couldn't fit the 3rd one in the middle because of the length of the ASUS Strix graphics card but it still worked out well. I eliminated the hard drive cage and removed some material from the PSU shroud to get the extra room for the lower pull fan. As you can see, I've added some custom made LED edge lit Acrylic pieces beside the PSU shroud and to the right of the motherboard (to hide the metal stamping). I think in the future I may make a few more acrylic pieces, possibly some direct print patterning on the glass and LL 120 RGB fans when I have the extra cash. I hope you like it.

 

Thanks for looking!

 

Specs:

i5 6500k at 4.5ghz

Asus Maximus Hero IX Z270

Asus Strix GTX 1070

16gb HyperX Fury Ram

120GB HyperX Cloud9 SSD

1tb 7,200rpm HD

Seasonic Focus Gold 650w

Corsair 460x case

Corsair h150i Pro

Corsair Gaming K70 Keyboard

EVGA Toro X3 Mouse

LGA 27" monitor

IMG_6521.thumb.JPG.79fe451ca9f0ba280a08f3774a658a36.JPG

IMG_6526.thumb.JPG.410439ff0fed3567539004274bc7df3d.JPG

IMG_6527.thumb.JPG.ec40e017bb912c67dcacdf3e92fc26b7.JPG

IMG_6529.thumb.JPG.9ea33b31ae2ffe702360cd3751ade219.JPG

IMG_6531.thumb.JPG.3ca31361183da1ea7996fc682736ba68.JPG

Link to comment
Share on other sites

  • 2 weeks later...

Hi :)

I would like to make the same thing, I have the 460x rgb case and I'm interresting into buy the h150i to make a push pull setup on the front. Where did you put your hard drive if you have removed the hdd cage ? I guess that I can't install the fan on the bottom if I don't cut a part of the PSU shroud and removed HDD case ? I think that I can only install 5 fans, does it will work well ? :(

Thank for your help

Link to comment
Share on other sites

Hi :)

I would like to make the same thing, I have the 460x rgb case and I'm interresting into buy the h150i to make a push pull setup on the front. Where did you put your hard drive if you have removed the hdd cage ? I guess that I can't install the fan on the bottom if I don't cut a part of the PSU shroud and removed HDD case ? I think that I can only install 5 fans, does it will work well ? :(

Thank for your help

 

I removed the cage and used double sided VHB tape to mount the hard drive to the bottom of the case. I mounted the hard drive on it's back to make it easier to plug in the connectors. The other more expensive option would be to use only SSD drives or M.2's. Yes, you'll have to cut the PSU shroud or leave the front part off to to fit the lower second fan. Good luck!

Link to comment
Share on other sites

  • 2 weeks later...

Corsair Crystal 460X

Corsair Hydro H150i Pro

Intel Core i3-8350K Quad-Core 4GHz

ASUS rog strix Z370-E GAMING

Samsung 960 EVO 250GB - NVMe M.2

Corsair Vengeance RGB LED -16GB, DDR4, 3600MHz

Corsair RM650i 650W

Corsair Commander PRO

Corsair ML120 PRO LED Red Premium - 3.

Corsair LL120 LED RGB - 6.

Corsair RGB LED Lighting Pro Expansion Kit

Corsair Cable Power Supply TYP4 (Generation 3)

Intel Optane 32GB

Seagate BarraCuda 2,5 - 1TB

 

soon and again EVGA GeForce GTX 1080 FTW 2 Gaming ICX

 

 

[ame]

[/ame] Edited by vesgg
Corsair 460X + H150i Pro + i3 8350K + ASUS Z370-E
Link to comment
Share on other sites

Corsair Crystal 460X

Corsair Hydro H150i Pro

Intel Core i3-8350K Quad-Core 4GHz

ASUS rog strix Z370-E GAMING

Samsung 960 EVO 250GB - NVMe M.2

Corsair Vengeance RGB LED -16GB, DDR4, 3600MHz

Corsair RM650i 650W

Corsair Commander PRO

Corsair ML120 PRO LED Red Premium - 3.

Corsair LL120 LED RGB - 6.

Corsair RGB LED Lighting Pro Expansion Kit

Corsair Cable Power Supply TYP4 (Generation 3)

Intel Optane 32GB

Seagate BarraCuda 2,5 - 1TB

 

soon and again EVGA GeForce GTX 1080 FTW 2 Gaming ICX

 

 

 

 

https://sehrha.dm2302.livefilestore.com/y4mCnoPgACq-WNNlT4EeY4o0dpJtC_3H9D_L1KmRF3Qanr5FQYg4XD5VoNRGaPv8U1pN7b5IYyE2OjZztps_dlMHGSFrTsUMy5BEy5NiwdTXB-Wzo6rMYUUoQ9bs5xCpcIKST_UE5hqr0yixL9ywImZhSrsjOmXWJNBtmon-DsArkFfziF6Te3Z-4-PfHsBh3Zd7O0uGmfPadFF7UuUnS1nMg?width=2268&height=4032&cropmode=none

Edited by Technobeard
changed to link
Link to comment
Share on other sites

 Share

×
×
  • Create New...