James7679 Posted January 10, 2018 Share Posted January 10, 2018 Hello all. I am hoping to get some advice here. I have a Node Pro and 2x HD120 3 Packs. I'm wondering if I can daisy chain two LED strips off of each terminal on the Node Pro and connect the HD120 kits at the end of each pair of LED strips. I know I can use one module with all six fans but with the separation of the fans in the case necessitates two modules. Link to comment Share on other sites More sharing options...
DevBiker Posted January 10, 2018 Share Posted January 10, 2018 No, you cannot. The fans need to be connected to an RGB Fan Hub ... if anything, you would connect the RGB Fan Hub to the end of the strips and it might work. However, you would have difficulty controlling them ... Link only allows one type of device per RGB Node ... and it certainly wouldn't be a supported configuration. Part of the challenge would have to do with the different number of LEDs per device ... the HD Fan has 2 more LEDs than the strip does. Link to comment Share on other sites More sharing options...
James7679 Posted January 10, 2018 Author Share Posted January 10, 2018 Yeah, I have two RGB hubs... that came with the two kits. Okay, so I can't run the hubs at the back of the chain, that sucks. I'll have to figure something else out. Link to comment Share on other sites More sharing options...
DevBiker Posted January 10, 2018 Share Posted January 10, 2018 Nothing wrong with having a CoPro and a NoPro in the same system for all the RGB joy and goodness your little heart can handle. I do ... 8 RGB Strips, 4 HD fans and I'm fixin' to get some LL fans too. 'cuz that's how I get my Vitamin D. :cool: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.