Jump to content
Corsair Community

No amperage readings for AX1500i


Raeldion
 Share

Recommended Posts

Hi,

 

I've recently built a new system (you can see it in my system specs) using an AX1500i PSU, but today I noticed that Corsair Link isn't reporting any amperage readings (they are all stuck at 0), with the only exception of the 12V Output.

 

I've also tried using SIV to check if it would report any different readings, but even in this case the only reported reading is the one for the +12 Output.

 

I've attached screenshots taken from both programs.

 

The PSU is connected directly to an USB 2.0 header on the motherboard and it seems to be working perfectly fine with the exception of the amperage readings.

 

Is this problem related to the Corsair Bus driver or is my PSU faulty?

 

Thanks in advance for your help.

Corsair_Link.thumb.PNG.890cb23a7c87bb8a11748b0a5e3371ef.PNG

SIV.thumb.PNG.fa80f429c9e1e70fc596ba8c0ad1224e.PNG

Edited by Raeldion
Link to comment
Share on other sites

  • 2 weeks later...

Hi,

a little update: I've tried disabling/uninstalling the other monitoring software that I had running on the system (mainly Asus AI Suite 3), but the issue persists.

 

I'll run some more tests and if the situation doesn't improve I will open a support ticket.

Link to comment
Share on other sites

 Share

×
×
  • Create New...