Jump to content
Corsair Community

Faulty module with post error AF


srdrew

Recommended Posts

Hi

 

I'm pretty sure I have a bad memory module. I have 2x512mb Corsair XMS2 DDR2 5400, dual channel. Currently only one works, I know this because if I put the one that I think is faulty I get an error code AF on my motherboard, and it won't boot. But the other boots up the PC fine. You can follow the thread on how I got to this point here: http://forum.abit-usa.com/showthread.php?threadid=75558.

 

I can only assume that it is the module and not another component or a bios setting, simply because both modules should work in the same way. Does any one have any other suggestions?

 

If you need any more info then let me know...

 

Heres my spec:

 

AA8 Duramax 3rd Eye mobo

1gb Corsair xms2 dual ddr2 5400 RAM

256mb X800 Pro Radeon Graphics Card

3.4ghz Processor

480w Thermaltake PurePower PSU

 

Thanks in advance!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...