Jump to content
Corsair Community

[QUESTION] CLNP Third party Addressable LED support


Dirtycopgangsta
 Share

Recommended Posts

@ Cubox

 

May I ask to see how you plugged the cables into the CP?

 

Here is the post where I explained exactly how I wired the LED strip to power and the CLCP. I was worried about how much current the strip could draw because the strip I bought was 144 LEDs (which is more that the CLCP can control anyway). They are packed right against each other.

 

So I used +5VDC direct from the system power supply. You probably don't have to do this and could just connect the power wire for your strip to the CLCP, but I was playing it safe.

 

There is a picture in the post of the wiring and a description that I hope is clear.

 

http://forum.corsair.com/forums/showpost.php?p=908903&postcount=9

Link to comment
Share on other sites

Since my images were a dead link, here is another one

https://photos.app.********/mrj2psWDtNqeJn662

 

It's some cables from amazon with a Dupont connector at the end. Soldered it to a wire that is itself soldered to the strip

 

That link is not working for me. I don't see a link in your earlier post either. What dead link are you referring to? This one?

Link to comment
Share on other sites

That link is not working for me. I don't see a link in your earlier post either. What dead link are you referring to? This one?

 

Same for me, the link is dead.

 

Corsair forums won't let me post the link. Copy paste it and replace the stars (or the %20s) by goog.le.

Link to comment
Share on other sites

 Share

×
×
  • Create New...