akingi Posted January 29, 2005 Share Posted January 29, 2005 i have been experiencing random lock ups and explorer crashes. i ran memtest86 an found errors in test 2, 6, and 8. i removed the vantec ramsinks i had on my memory and the corsair label came off. i still have the label, but the label not being on the ram, am i out of luck for an RMA? Link to comment Share on other sites More sharing options...
akingi Posted February 1, 2005 Author Share Posted February 1, 2005 should this go in the warranty sub forum? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 2, 2005 Corsair Employees Share Posted February 2, 2005 Please make sure that you have the latest BIOS for your MB and load Setup/Optimized default settings, and try the following BIOS settings; VS512MB333 CPU Freq: 133 MHz (266 FSB) System Performance: User Define Memory Frequency/CPU:Ratio: 125% / 2:3 Resulting Frequency: 166 MHz (333 FSB) Memory Timing: User Define SDRAM CAS Latency: 2.5T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 8T DDR Reference Voltage: 2.7 Volts AGP Voltage: Default *unless you have ATI (9200 or 9600) or NVIDIA (5200 or 5700) then 1.6 Volts suggested!* All other settings are motherboards defaults Then please test them one at a time with http://www.memtest.org and let’s make sure it's not some other issue! I would run the test for at least 2-3 passes to be sure! Link to comment Share on other sites More sharing options...
akingi Posted February 2, 2005 Author Share Posted February 2, 2005 i did as you said and i still get lots of errors in test 6 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 2, 2005 Corsair Employees Share Posted February 2, 2005 MOVING THIS THREAD TO Warranty Questions! Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
akingi Posted February 2, 2005 Author Share Posted February 2, 2005 you will replace it even though the sticker came off? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 2, 2005 Corsair Employees Share Posted February 2, 2005 Do you still have the sticker? If you do then yes most likely, if not then I am sorry I would not know, we would have to inspect the module. But if you have an invoice that may help. Please talk to customer service about this and I am sure they will do what they can too help you! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.