Jump to content
Corsair Community

No control in Corsair link


sherr
 Share

Recommended Posts

Hello guys!

The Corsair Link software does not show the ram as a device. I can change settings for RGB.

What is wrong?

 

My system configuration:

Asrock fatal1ty x99 professional gaming i7

Intel Xeon E5-2695v3

Corsair CMR16GX4M2C3000C15

Asus GTX 1060

Samsung 850 Evo

Corsair HX1000i

Windows 10 Pro

 

 

Screenshot of Corsair Link:

https://imgur.com/a/tV17s

Edited by sherr
Link to comment
Share on other sites

attachment.php?attachmentid=31106&d=1505306981

 

The Southbridge is X99 so I suspect it should work.

 

SPD write need to be enabled to control the LEDs, but even if it's not then they should show up.

 

If you post the SIV screen shots mentioned in the linked post I could comment further.

Edited by red-ray
typo
Link to comment
Share on other sites

The Southbridge is X99 so I suspect it should to work.

 

SPD write need to be enabled to control the LEDs, but even if it's not then they should show up.

 

If you post the SIV screen shots mentioned in the linked post I could comment further.

 

I tried, but AIO Link LEDs is Not Available. See screenshot

1.thumb.JPG.e5e44dc62281f5812766ca06e4af97fd.JPG

Link to comment
Share on other sites

I tried, but AIO Link LEDs is Not Available. See screenshot

 

Did you specify -AIOLED?

 

To enable this facility -AIOLED needs to be specified on the command line.

 

If you have any issues please report them and attach the [Link Status] + [Link LEDs] + [sMB Bus] + [sPD Summary] screen shots.

Link to comment
Share on other sites

 Share

×
×
  • Create New...