ToxikTyson Posted September 6, 2017 Share Posted September 6, 2017 Hello, as the Title says i have: 5xHD140 Fans 1xCLNP 1xSP120 Fan ( CPU Fan , not a HD140 because the lack of space ) I cannot control the Lighting of SP120 - No matter what i configure in the software. Whether i set the whole LED-Channel #1 to RGB SP Fan or RGB HD Fan it does not Light up at all. Also i cannot plug the SP120 anywhere else since the plug has got 4 cables and does not fit anywhere. I can control its speed tough. Is there a way to fix my problem without buying another Commander Pro? Picture of my cable setup: http://i.imgur.com/dVag8wS.jpg Corsair Link-Version: 4.8.2.1 Commander Pro Firmware: 0.2.136 Link to comment Share on other sites More sharing options...
red-ray Posted September 6, 2017 Share Posted September 6, 2017 No, you can't have SP and HD fans connected to the same LED hub. I suggest you get a HD120 fan. Link to comment Share on other sites More sharing options...
ToxikTyson Posted September 6, 2017 Author Share Posted September 6, 2017 wow thats some bull****. due to corsairs design on the fans i cannot fix the fan on my cooler. http://www.thermalright.de/media/image/thumbnail/814256001053_420x420.jpg i would need to come up with some own construction i guess Link to comment Share on other sites More sharing options...
red-ray Posted September 6, 2017 Share Posted September 6, 2017 (edited) wow thats some bull****. The HD fan (WS2811B) and SP fan (UCS1903) LEDs use a different protocol and suggest you read http://forum.corsair.com/forums/showthread.php?t=165029 for further details. Edited September 6, 2017 by red-ray Link to comment Share on other sites More sharing options...
Recommended Posts