Cook4Life Posted August 26, 2017 Share Posted August 26, 2017 Hi, I have a Intel I7 2600 CPU attached the Corsair Hydro H100i V2. Changed the fans in the radiator for the Silent Wings 3 Both fan's are attached to a Lamptron Touch Fan controller because i want to have the fan speed controlled when the temp starts to go up. Currently i have 19% cpu load, CPU temp of 55 Celcius, fan's are currently set to manual and are rotating at 100% blowing are trough the radiator out my desktop. I expected the temperatur to be lower. What am i doing wrong? Link to comment Share on other sites More sharing options...
red-ray Posted August 26, 2017 Share Posted August 26, 2017 It would be easier to help if you used http://forum.corsair.com/forums/profile.php?do=extra Post a link to the fan specs What is the H100iV2 temperature and pump speed? Ideally post the [Cooling Status] screen from my SIV utility and optionally the CL4 [Home] tab screen shot. See http://forum.corsair.com/forums/showthread.php?p=853900 for how to attach a file/screen image to a post. Link to comment Share on other sites More sharing options...
Cook4Life Posted August 26, 2017 Author Share Posted August 26, 2017 Hi Red-Ray, I didn't fill in my system components in my profile because i have multiple systems with corsair hydro. I cannot use the Corsair software because the guy that installed my system didn't consider that i would want to connect the pump to USB. Now my memory modules are blocking the connection. This is the link to my fan And the pics you requested attached. Hope this is helpfull Link to comment Share on other sites More sharing options...
red-ray Posted August 26, 2017 Share Posted August 26, 2017 As you can't post the H100iV2 temperature and pump speed then I can't help you. I suggest you return the system and ask for the H100iV2 to be correctly installed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.