Jump to content
Corsair Community

ASUS K8V Deluxe and VIA K8T800


m404

Recommended Posts

I have the above MB with twin CMX512-3200XLPRO. I read somewhere that this chipset will not allow recognition or the full operation of three identical size modules and the recomendation was that if I had two 512s and wanted a third stick it should be a 256. This MB only has 3 DIMM sockets. I like the activity LEDs IF they actually are indicative of usuage as they have alerted me in the past to uncommanded and unwanted unit activity. Do you know of such an issue? For that matter since I am not particulary a hard line gamer but video editor and multi tasker would you say I would ever use more than 1gb?
Link to comment
Share on other sites

  • Corsair Employees
I would not suggest more than 2 modules with this MB as you may have to run at DDR333. And I would try and set the Dim Voltage to 2.8 Volts and you might move the modules to slots 1-3 or 2-3 and see if that makes any difference!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...