tomkelso2003 Posted January 22, 2005 Share Posted January 22, 2005 First, I can't stop smiling since I installed these 2 memory sticks in my system. :D: I bought this memory for an AMD-64 system that I was going to build. However, after trying this memory in my current system and seeing how well they work, I don't think I will need to upgrade for some time. I have an AMD-XP 3000+ with 333 Mhz FSB. Previous memory was 3 sticks of pc-2700 2.5 3 3 7 2t. Settings for the 3200xlpt memory is as follows... Fast Command: fast Dram Timing: manual Dram CAS latency: 2 Bank Interleave: 4 Precharge to Active (Trp): 2 Active to Precharge (Tras): 6 Active to Cmd (Trcd): 2 Dram burst length: 8 Dram queue length: 4 Dram Queue Rate: 1T Write recovery time: 2 Dram tWTR: 1T Dram closk: auto (it selected 400) Dram voltage: +0.2 I have a three main questions: 1 - I believe the Dram voltage at +0.2 is 2.7 volts which I saw in other posts. Is this the correct setting as I didn't see anything about this on the corsair memory package. 2 - There are only 6,7,8,9 settings in the bios for Tras. I selected 6. Would it make a performance difference to be able to set this to 5 ? Would Gigabyte be open to a request for an updated bios to support your memory specifications ? Would Corsair have better luck that a single person making such a request ? 3 - I do not know what the bios settings for Write recovery time 2 or 3 and Dram tWTR 1T or 2T mean. Do you have any information about these settings ? Thanks Tom Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 24, 2005 Corsair Employees Share Posted January 24, 2005 1 - I believe the Dram voltage at +0.2 is 2.7 volts which I saw in other posts. Is this the correct setting as I didn't see anything about this on the corsair memory package? A: Yes +.2 Volts! 2 - There are only 6,7,8,9 settings in the bios for Tras. I selected 6. Would it make a performance difference to be able to set this to 5? Would Gigabyte be open to a request for updated bios to support your memory specifications? Would Corsair have better luck that a single person making such a request? A: No probably there would be no difference if any at all. And no you would have a better chance at getting support from the MB maker then we would, sorry! 3 - I do not know what the bios settings for Write recovery time 2 or 3 and Dram tWTR 1T or 2T mean. Do you have any information about these settings ? A: Any bios settings not published under XMS Qualification and Testing for the specific module you should be set to Bios default or AUTO! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.