Jump to content
Corsair Community

Twinx 3200llpt + KV8 PRO 3rd eye Ram timings


Recommended Posts

Hi ram guy


I have a question regarding my memory timings for my Twinx 3200llpt and my abit kv8 pro 3rd eye mobo. I know the timings for the ram are 2-3-2-6, but these dont match the timings given by the mobo when set to "by spd"


The options are:


cas latency time ?

ras# to cas# delay ?

min. ras# active time ?

ras# precharge time ?

row cycle time ?

row refresh cycle time ?

ras# to ras# delay ?

write recovery time ?

write to read delay ?

read to write delay ?


any help would be appreciated with the above required figures for my ram. I'm a real overclock, bios settings n00b....:s



Link to comment
Share on other sites

  • Corsair Employees

Please use this as a reference with the modules in slots 1-3 or 2-3.

Dim Voltage to +2.7 Volts:

CAS Latency CL=2.0

Row Cycle Time tRC Bios Default

Row Refresh Cyc Time tRFC Bios Default

Ras# to CAS# delay tRCD 3

Row to Row delay Bios Default

Min Ras# Active Time tRAS 6

Row Precharge Time tRP 2

Write Recovery Time Bios Default

Write to Read delay Bios Default

Read to Write Delay Bios Default

Refresh Period tREF Bios Default

Enable 2T Timing Disabled

Then test the system with http://www.memtest.org and make sure it's stable! If you have problems, I would set Enable 2T Timings to AUTO and test it again!

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...