Dicehunter Posted August 19, 2017 Share Posted August 19, 2017 Both Link and CUE are causing high idle clocks on my Ryzen based system, I have it overclocked to 4GHz using P-State values so voltage goes up or down with the clocks to keep temps and volts down when not needed and when CUE + Link are not running in the background temps, Clocks and volts go way way down, With them running in the background temps go up and volts go up along with clocks and then stay like that until CUE + Link are shutdown. Any chance this could get a looksy in the next update ? http://i.imgur.com/PloKtZ2.png Link to comment Share on other sites More sharing options...
syrkel2 Posted August 23, 2017 Share Posted August 23, 2017 Corsair Link 4.8.0.82 Windows 10 Pro 64 Bit When the corsair link software is running in the background and the foreground I experience mouse lag issues. When the software is running either in the background or in the foreground I get mouse lag skipping issues. I have tracked it down to the corsair link software as it stops when I completely close it. Is this a known issue for this software version? Link to comment Share on other sites More sharing options...
Moby Posted August 23, 2017 Share Posted August 23, 2017 V.4.8.0.82 H115i windows 10 My controller is not found, I tried updating it through windows, but i cant -.- I uninstalled corsair link and reinstalled it, but the problem continues. I cant use my custom profiles and it does not give me some information that i used to get. The picture have all info of the problem: Link to comment Share on other sites More sharing options...
red-ray Posted August 23, 2017 Share Posted August 23, 2017 The picture have all info of the problem: Not quite, what is the driver error code reported via Device Manager? Look at the properties. If the driver error is code 52 see http://forum.corsair.com/forums/showthread.php?p=916582 Link to comment Share on other sites More sharing options...
Moby Posted August 24, 2017 Share Posted August 24, 2017 ooops, haha, yes code is 52, but... the solution is hard for me, cause my english is not the best, especially, in computing area my vocabulary sucks and is very hard for me... i think i must wait for a new version or i must to wait for them to sign their drivers... -.- ty for all anyway :c Link to comment Share on other sites More sharing options...
red-ray Posted August 24, 2017 Share Posted August 24, 2017 ooops, haha, yes code is 52, but... the solution is hard for me, cause my english is not the best, especially, in computing area my vocabulary sucks and is very hard for me... i think i must wait for a new version or i must to wait for them to sign their drivers... -.- ty for all anyway :c You need to use the driver I attached to http://forum.corsair.com/forums/showthread.php?p=856104 Download http://forum.corsair.com/forums/attachment.php?attachmentid=25511&d=1464936609 which is hydros7289-3.6.zip extract file files From Device Manager Right/Click on the Corsair USBXp Driver and select Update Driver Software... Press Browse my computer ... Set the location where you expected hydros7289-3.6.zip to. Select the Hydros 7289 device. Link to comment Share on other sites More sharing options...
Administrators Technobeard Posted August 25, 2017 Author Administrators Share Posted August 25, 2017 Thanks for your comments everyone. Link v4.8.2.1 has been released. The new discussion thread is located here: http://forum.corsair.com/forums/showthread.php?t=170441 This thread is now closed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.