cicatriz Posted July 5, 2017 Share Posted July 5, 2017 Hey guys, Sorry if this has been asked before but I just wanted to check the correct setup for a dual AIO solution just when it comes to plugging them into the motherboard. The h110i GT is for my CPU and it is connected to the motherboard as normal (3 pin connected to CPU_FAN pins, 2 x rad fans connected to the cables coming off h110i GT heatsink and third cable from the heatsink connected to SATA power), the H75 is for my GPU. Is it okay to connect the H75 pump to a CHA_FAN connector on the motherboard? If so what is the correct setting for this connector, just DC mode? I assume I just want this pump going max at 12v? Thanks a lot Link to comment Share on other sites More sharing options...
Corsair Blake Posted July 6, 2017 Share Posted July 6, 2017 Hey guys, Is it okay to connect the H75 pump to a CHA_FAN connector on the motherboard? If so what is the correct setting for this connector, just DC mode? I assume I just want this pump going max at 12v? Thanks a lot Yes, this is correct! Plug your H75 into CHA_FAN and go into BIOS, ensure that it's running at 100% / 12V. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.