cjacobs2 Posted January 18, 2005 Share Posted January 18, 2005 An NForce 2 board was giving Prime 95 errors. Removing one memory module solved this problem. The board had previously been stable under prime 95, so it appears the memory module has died. Link to comment Share on other sites More sharing options...
Wired Posted January 19, 2005 Share Posted January 19, 2005 Have you tried that stick in all slots to make sure it isn't a bad slot? What CPU / FSB / motherboard do you have? What part # / revision # memory do you have? How To Read the Memory Label Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted January 19, 2005 Corsair Employee Share Posted January 19, 2005 Can you tell me the module part# and the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.