tonypucks Posted September 9, 2003 Share Posted September 9, 2003 I have run memtest a few times and I'm getting memroy corruptions. I need the rma form Thanks Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 9, 2003 Corsair Employee Share Posted September 9, 2003 Can you please tell us the MB, CPU, and bios settings you are using with your system? Thank you. Ram Guy Link to comment Share on other sites More sharing options...
tonypucks Posted September 12, 2003 Author Share Posted September 12, 2003 512 MB TwinX Matched Memory Pair XMS P4 2.4C IC7-G Default Bios Settings Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 15, 2003 Corsair Employee Share Posted September 15, 2003 O.K. and can you tell me the exact module part# you have and the bios settings you have set? Ram Guy Link to comment Share on other sites More sharing options...
tonypucks Posted September 22, 2003 Author Share Posted September 22, 2003 How do I find my Memory Type out and what particular Bios settings do you need. There are over 200 settings there... I am new to Computers so pardon my ignorance. Thanks Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 22, 2003 Corsair Employee Share Posted September 22, 2003 On the modules label or on the package should be the part# like Twinx1024-3200C2. And for the setting please use [URL=http://www.houseofhelp.com/forums/showthread.php?s=&threadid=8048]This as a reference[/URL] for the bios settings. Just look up the module or module set you have and compare the bios settings listed. Ram Guy Link to comment Share on other sites More sharing options...
tonypucks Posted September 23, 2003 Author Share Posted September 23, 2003 CMX512-3200LL PL: 256mb Twin Sticks CAS Latency Timer 2.5 Act to Precharge Delay 6 DRAM CAS# to ... delay 3 DRAM RAS # Precharge 2 Host/DRAM Frequency 200/200 MHZ Memory Hole at 15m-16m Disabled Read Delay (tRD) Auto Read Delay Adjust (tRDA) AUTO Comand per CLock (cpc) Auto This is what I copied from the Bios settings. Are these settings the one you wanted? Thanks Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 25, 2003 Corsair Employee Share Posted September 25, 2003 The reccomended settings for your system are: DRAM Clock: 200 MHz SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 2T SDRAM Active to Precharge Delay (tRAS): 6T DIMM voltage: 2.7X If you do find errors, please send us an email with a copy of the [URL=http://www.corsairmemory.com/main/rma_request.xls]FORM[/URL] and or all of your info name address and phone# and the Module part# and copy the link to this post and email it to [email]Rma@corsairmicro.com[/email] . If after 1 day or 24 hours excluding weekends you do not get the rma please email the same to [email]warranty@corsairmicro.com[/email] and we will help to resolve it. Thank You! Ram Guy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.