Kriotus Posted March 31, 2017 Share Posted March 31, 2017 So as I am putting my PC together and cable managing in my 460x RGB, I have found one part from the top-front that goes to the outer case fan controls buttons on the top of the 460x RGB. They are these 4 sets of twisted cables that at the end where they are supposed to go into the motherboard say Power SW, Power LED + and -, H.D.D. LED, and Reset SW, and I just can't figure out where they go on my motherboard (MSI Z270 Gaming M5). It's basically the only thing holding me back from finishing my first PC build. Any and all helping is appreciated, thanks. Link to comment Share on other sites More sharing options...
Toasted Posted March 31, 2017 Share Posted March 31, 2017 That would be the front I/O connections. Refer to your motherboard's user manual for front panel connections. Link to comment Share on other sites More sharing options...
snapper69 Posted March 31, 2017 Share Posted March 31, 2017 Refer to pages 6 and 25 of your manual (you can download it from the Msi site if you don't have one) assuming that the pages are the same in the online version as the one that should have come with the motherboard. Page 6 tells you which cable goes where and 25 shows you where the JFP1 header is. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.