Turbo-X4n Posted January 14, 2005 Share Posted January 14, 2005 What are the correct timings for this mainboard/memory combo? Mobo:A8V Deluxe Memory: 2x512MB Corsair Twins XMS LLPT PC3200 Rev 1.2 obs: When i use 1gb ram... a lot error messages are show when i Start any program.. message of archive corrupted thks Link to comment Share on other sites More sharing options...
Turbo-X4n Posted January 17, 2005 Author Share Posted January 17, 2005 please I need help...!!! Thks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 18, 2005 Corsair Employees Share Posted January 18, 2005 Please install the modules in slots 2-4 and then enter the bios setup and load setup defaults and set the following settings: Dim Voltage to +2.7 Volts: CAS Latency CL=2.0 Row Cycle Time tRC Bios Default Row Refresh Cyc Time tRFC Bios Default Ras# to CAS# delay tRCD 3 Row to Row delay Bios Default Min Ras# Active Time tRAS 6 Row Precharge Time tRP 2 Write Recovery Time Bios Default Write to Read delay Bios Default Read to Write Delay Bios Default Refresh Period tREF Bios Default Enable 2T Timing Disabled Then test the system with http://www.memtest.org and make sure it's stable! If you have problems, I would set Enable 2T Timings to AUTO and test it again! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.