johnnymobo Posted January 13, 2005 Share Posted January 13, 2005 Hi, I have: Sparkle 350W power supply from other computer 1.5 years old Asus A7V8X-X AMD Barton 2500 XP FSB set to 166/33 for the 333 1024 RAM 2x512 333 corsair valueselect 7-3-3-2.5 (stock settings I know little about o'Clocking, nor do try to do it) 40GB Maxtor 7200 120GB Maxtor 7200 CDRW DVD-RW two larger fans in the antec lanboy case When I use one stick of the 512, all is "usually" well. If I use both sticks, the system hangs or just doesn't boot. THe memory is set to 7-3-3-2.5. Is that correct or should I adjust it to something else. I don't want to RMA the memory, but it is looking more like it. Please help. Thank you. When I went to the website, all I could find for the settins were n/a for VS512MB333. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted January 18, 2005 Corsair Employee Share Posted January 18, 2005 Please test the modules one at a time with http://www.memtest.org to be sure one is not failing. If they both pass then please try and set the Dim Voltage to 2.7 Volts and set the timings as you had them listed Cass 2.5-3-3-7 and install them in slots 1-3 if you have 3 slots! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.